Description
Proxima Series Electrofusion unit 40 Volt (20 – 800 Coupling range)
The Proxima Series Electrofusion unit input is 230 volts with 40 volt output. Automatic Fusamatic (embedded resistor) recognition and Manual weld time input. The Proxima Series Electrofusion unit includes a USB port for data retrieval via a USB memory stick for weld analysis. The PROXIMA welder system includes Temperature compensation while completeing your weld. Fusion Qld offer theProxima Series Electrofusion unit for purchase and hire from both our Fusion Queensland and Fusion Melbourne locations. We can provide annual calibration and general repairs and maintenance of all Fusion Electrofusion Machines.
Detachable output cord via a Military Plug connector to protect lead damage. The output leads are fitted with 4.7mm terminal connectors. All welders are supplied with bonus adaptors to connect from 4.7mm to 4mm fittings.
• Secondary voltage sensed at fitting for accurate power control.
• 10m. Input power chord with choice of plug
• Choice of either 110v or 230 v A.C. Supply.
• Point of fusion recorded by reference to GPS on Polaris models.
• Caldersafe weld data analysis package included.
• Sustainability Plus circuitry
• Primary voltage, Secondary voltage & Secondary Current recorded in historical fusion data memory.
| Technical Specifications | |
| Input Voltage [Vac] | 110v / 230v |
| Input Frequency [Hx] | 40-60 |
| Input Current [Max. A] | 16 |
| Input Power [KW] | 3 |
| Output Voltage [Vac RMS] | Aug-48 |
| Output Current [Continuous. Aac RMS] | 60 |
| Environmental Protection | IP54 |
| Data Recording Capacity | 750 |
| Coupling size range | 20-800mm |
| Mechanical Information | |
| Dimensions [HxWxL] | 360 x 330 x 350mm |
| Weight [Kg] | 26 |
| Case Material | ABS & Aluminium |
| Mains Input Cable Length | 4m |
| Fusion Output Cable Length | 4m Standard |
Caldervale Technology
Since the 1970`s Fusion Equipment have been pioneers in the products to assist in the installation of polyethylene pipe. To the distribution and supply of gas and water in the United Kingdom. These included socket fusion and saddle fusion tools, butt fusion machines, and later electrofusion equipment.
Caldervale Technology re-entered the same market early in the final decade of the 20th century. After many years also in the supply of related products under the banner of Calder Technical Services.
Both companies independently developed and supplied electrical, electronic and mechanical products. The move towards the adoption and use of plastic piping increased worldwide. This expanding into landfill gas reclamation, waste water and sewerage as these markets also adopted plastic piping.
With almost 50 years’ experience in the supply of fusion jointing equipment, both separately and now together. Under the leadership of principle directors and proprietors Paul Myers and Gordon Lilley, you can be sure that when you choose Caldervale & Fusion as your supply partner you get much more than a product. You have chosen companies who have supported their partners through global recessions and enormous technological changes. Hence companies who truly understand your needs and guarantee to be there when you need us.
Follow the link to learn more about Caldertech’s great range of Equipment & Tooling – Caldertech
